第十周--解决DOS攻击

最新推荐文章于 2024-01-24 15:25:46 发布

原创最新推荐文章于 2024-01-24 15:25:46 发布 · 966 阅读

1 ·

本内容遵循CC 4.0 BY-SA版权协议

收录于

Linux

1、编写脚本selinux.sh，实现开启或禁用SELinux功能
1>创建脚本selinux_control.sh

[root@centos7 data]# vim selinux_control.sh 
#!/bin/bash
[ -z "$*" ] && { echo -e "Usage:`basename $0` on|off" ;exit 2 ; }
if [ "$1" == "on" ];then
	sed -i "s/SELINUX=disabled/SELINUX=enforcing/g" /etc/sysconfig/selinux && setenforce 1
	echo "SELINUX enforcing"
elif [ "$1" == "off" ];then
	sed -i "s/SELINUX=enforcing/SELINUX=disabled/g" /etc/sysconfig/selinux && setenforce 0
	echo "SELINUX disabled"
else
	echo "argument error"
fi

2>添加执行权限，检查selinux配置文件

[root@centos7 data]# chmod +x selinux_control.sh
[root@centos7 data]# cat /etc/sysconfig/selinux 

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected. 
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted

3>执行脚本

[root@centos7 data]# sh /selinux_control.sh ###不带参数
Usage:selinux_control.sh on|off
[root@centos7 data]# sh /selinux_control.sh dafda  ###带错误参数
argument error
[root@centos7 data]# sh /selinux_control.sh on   ###启动selinux
SELINUX enforcing
[root@centos7 data]# cat /etc/selinux/config 

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=enforcing
# SELINUXTYPE= can take one of three values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected. 
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted 

[root@centos7 data]# sh selinux_control.sh off  ###禁用selinux
SELINUX disabled
[root@centos7 data]# cat /etc/sysconfig/selinux 

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected. 
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted

2、统计/etc/fstab文件中每个文件系统类型出现的次数

[root@centos7 ~]# cat test.locat /etc/fstab | awk '/^UUID/{sum[$3]++}END{for(type in sum){print type,sum[type]}}'
swap 1
xfs 3

3、提取出字符串"Yd$C@M05MB%9&Bdh7dq+YVixp3vpw"中的所有数字

tr提取：

[root@centos7 ~]# echo "Yd$C@M05MB%9&Bdh7dq+YVixp3vpw"|tr -dc "[^0-9]"
05973

grep提取：

[root@centos7 ~]# echo "Yd$C@M05MB%9&Bdh7dq+YVixp3vpw"|grep -o '[0-9]'
0
5
9
7
3

awk提取：

[root@centos7 ~]# echo "Yd$C@M05MB%9&Bdh7dq+YVixp3vpw"|awk -F '[^0-9]+' '{for(i=1;i<=NF;i++){print $i}}'

05
9
7
3

4、解决DOS攻击生产案例:根据web日志或者网络连接数，监控当某个IP 并发连接数或者短时内PV达到100，即调用防火墙命令封掉对应的IP，监控频率每隔5分钟。防火墙命令为:iptables -A INPUT -s IP -j REJECT

1>创建脚本dos_prevent.sh

[root@centos7 ~]# ip addr show eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:be:ff:5b brd ff:ff:ff:ff:ff:ff
    inet 192.168.100.7/24 brd 192.168.100.255 scope global noprefixroute eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:febe:ff5b/64 scope link 
       valid_lft forever preferred_lft forever

[root@centos7 data]# vim dos_prevent.sh 
#!/bin/bash

#以IP和时间为下标创建数组，确保短时间内同一IP的大量访问是dos攻击
#判断短时间内同一IP访问次数大于100，将符合条件的IP输出到文件
awk  '{sum[$1$4]++}END{for (ip in sum){if(sum[ip]>100)print ip,sum[ip]}}' /var/log/httpd/access_log | cut -d'[' -f1 | uniq > /data/ip.log
while read LINE;do
	if [ -n "$LINE" ];then	
		#检查防火墙规则是否已经添加过攻击IP，如果有，跳过此次循环，否则添加
		if iptables -L|grep -q $LINE;then
			continue
		else
			iptables -A INPUT -s $LINE -j REJECT
			echo $LINE >> /data/blacklist.log
		fi
		
	fi
done < /data/ip.log

[root@centos7 data]# chmod +x dos_prevent.sh

2>添加任务计划，并检查防火墙规则

[root@centos7 ~]# vim /etc/crontab
*/5 * * * * root sh /data/dos_prevent.sh &>/dev/null

[root@centos7 ~]# iptables -nvL
Chain INPUT (policy ACCEPT 426 packets, 67223 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain OUTPUT (policy ACCEPT 150 packets, 21356 bytes)
 pkts bytes target     prot opt in     out     source               destination

3>在另一台机器上使用ab测试

[root@centos6 ~]# ip addr show eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:8c:f8:9c brd ff:ff:ff:ff:ff:ff
    inet 192.168.100.6/24 brd 192.168.100.255 scope global eth0
    inet6 fe80::20c:29ff:fe8c:f89c/64 scope link 
       valid_lft forever preferred_lft forever
       
[root@centos6 ~]# ab -c20 -n200 192.168.100.7/index.html
This is ApacheBench, Version 2.3 <$Revision: 655654 $>
Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/
Licensed to The Apache Software Foundation, http://www.apache.org/

Benchmarking 192.168.100.7 (be patient)
Completed 100 requests
Completed 200 requests
Finished 200 requests


Server Software:        Apache/2.4.6
Server Hostname:        192.168.100.7
Server Port:            80

Document Path:          /index.html
Document Length:        208 bytes

Concurrency Level:      20
Time taken for tests:   0.068 seconds
Complete requests:      200
Failed requests:        0
Write errors:           0
Non-2xx responses:      200
Total transferred:      77400 bytes
HTML transferred:       41600 bytes
Requests per second:    2925.90 [#/sec] (mean)
Time per request:       6.835 [ms] (mean)
Time per request:       0.342 [ms] (mean, across all concurrent requests)
Transfer rate:          1105.79 [Kbytes/sec] received

Connection Times (ms)
              min  mean[+/-sd] median   max
Connect:        0    0   0.7      0       3
Processing:     2    6   1.8      6      10
Waiting:        0    6   1.8      6       9
Total:          3    6   1.8      6      11

Percentage of the requests served within a certain time (ms)
  50%      6
  66%      7
  75%      8
  80%      9
  90%      9
  95%     10
  98%     10
  99%     10
 100%     11 (longest request)

4>检查cron服务日志，并检查防火墙规则

[root@centos7 ~]# tail -f /var/log/cron
Apr 21 21:01:01 centos7 run-parts(/etc/cron.hourly)[6270]: finished 0anacron
Apr 21 22:01:01 centos7 CROND[6670]: (root) CMD (run-parts /etc/cron.hourly)
Apr 21 22:01:01 centos7 run-parts(/etc/cron.hourly)[6670]: starting 0anacron
Apr 21 22:01:01 centos7 run-parts(/etc/cron.hourly)[6679]: finished 0anacron
Apr 21 22:51:01 centos7 crond[628]: (*system*) RELOAD (/etc/crontab)
Apr 21 22:55:01 centos7 CROND[7124]: (root) CMD (sh /data/dos_prevent.sh &>/dev/null)
Apr 21 22:56:10 centos7 crond[628]: (CRON) INFO (Shutting down)
Apr 21 22:56:10 centos7 crond[7151]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 13% if used.)
Apr 21 22:56:10 centos7 crond[7151]: (CRON) INFO (running with inotify support)
Apr 21 22:56:10 centos7 crond[7151]: (CRON) INFO (@reboot jobs will be run at computer's startup.)
Apr 21 22:57:01 centos7 crond[7151]: (*system*) RELOAD (/etc/crontab)
Apr 21 23:00:01 centos7 CROND[7197]: (root) CMD (sh /data/dos_prevent.sh &>/dev/null)
Apr 21 23:01:01 centos7 CROND[7209]: (root) CMD (run-parts /etc/cron.hourly)
Apr 21 23:01:01 centos7 run-parts(/etc/cron.hourly)[7209]: starting 0anacron
Apr 21 23:01:01 centos7 run-parts(/etc/cron.hourly)[7218]: finished 0anacron

[root@centos7 ~]# iptables -nvL
Chain INPUT (policy ACCEPT 195 packets, 45949 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 REJECT     all  --  *      *       192.168.100.6        0.0.0.0/0            reject-with icmp-port-unreachable

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain OUTPUT (policy ACCEPT 33 packets, 3656 bytes)
 pkts bytes target     prot opt in     out     source               destination