解决笔记本电池自动放电的问题

装机必备软件－BatteryMoncn电池

BatteryMon是一款笔记本电池检测软件，而非电池修复软件，所以其使用场景一般是购买笔记本电脑或笔记本电池后做电池信息检测；比如：了解电池容量、生产日期、品牌名称、待机时间、设置低电量报警等

BatteryMoncn是一个联想笔记本专用的电池校正软件，说是专用，其实其他品牌的笔记本也是可以使用的，解决笔记本使用时间长后电池性能降低的问题。 使用方法：解压，在笔记本开始充电时候，运行，直接点开始。一段时间后会显示充电结束。然后关机，拔出笔记本电源插头，再开机，运行程序，这时候软件显示是放电。一定时间后放电结束，等到电脑自动关机为止，然后再插上笔记本电源，开机运行程序，显示充电，结束后再关机，拔出电源，在开机运行，程序显示放电，等到关机为止。以上一共进行了两个回合，一般2-3回合是一个周期。

BatteryMon 软件可以明显延长电池使用时间，修正笔记本电池。

R720主板芯片驱动SERVER2008R264位

最近在朋友买了一个二手的DELL C1100(CS24-TY) 机架式服务器。 注意CS24-TY是DELL C1100的定制型号，和标准版的有所不同。但是网上玩家已经试出了更新标准版BIOS和BMC的方法(见下面英文介绍的步骤)。不过我嫌麻烦，没有做CMOS放电的步骤，也成功了。 ------------------------------------------------------------------------------------------------- I want to write this guide because a lot of people are getting the C1100 off of Ebay or other sources and trying to update firmware but having trouble. So you botched up the BMC firmware update? The orange/amber light is blinking and blue light is on and the power button does nothing? The C1100 is stuck at amber orange blinking light? Open up your C1100 (powered off) Close to where the PCI-E card is, somewhere on the motherboard there are a few jumper. On particular one, should say something like CLR CMOS. Put the CLR CMOS so that its its on the other two pins from what it originally was. Put the power cord in, wait 10 seconds, Pull the power cord. Put the CLR CMOS jumper back to original position. CAREFUL: THE FANS WILL GO AT FULL THROTTLE Put the power cord back in. The fans will go at full throttle. Now wait for like 5 or so minutes! Plug in your monitor, keyboard and USB Bootable Thumbdrive with DOS and firmwares (see below). It will first say CMOS and BMC not responding, loading defaults etc and restart. Wait another 5 minutes, press F11 to get the BBS Priority and choose your USB thumb drive. If you pull the power cord at any other moment, you will have to redo the CLR CMOS to boot up again. Getting the BIOS and BMC Files together: Get DOS on USB (search for Rufus, find on github or google,制作成freedos启动盘) Get the latest BIOS B25 Get the latest BMC 1.86 Put it all in directory of the usb flash drive (make sure directory less than 8 characters) Updating the BIOS: Boot to DOS Find the BIOS directory ( I called mine b25) Enter command AFUDOS .ROM /P /B /K /X This is the same as the F.BAT file that comes from dell but with