GPR去除直流分量的问题

一直以来都是按照经验来进行DC校正，MALA的文件会推荐一个值直接用于去除直流漂移，

一般有  Subtract-mean (dewow)  和subtract-DC-shift

dewow

   其具体定义如下

The filter acts on each trace independently. With this option activated a running mean value is calculated for each value of each trace. This running mean is subtracted from the central point.

As filter parameter the time window for the calculation of the running mean value must be entered. 

This filter may be used for eliminating a possible low frequency part ( dewow). For this purpose the window range should be set to about one principal period.

-----杨哲理解------------------------------

老师，我感觉去直流的话 FFT直观一些，dewow这个应该是滑动(时窗大小的)窗口，给每道A-san 窗口中心点 减去 窗内 均值，会改变波形。
之前看到DZT雷达的偏移不是直流(恒定)的，可能 dewow 是针对  变化的偏移  效果更好。
对于直流偏移用dewow会改变波形