蓝桥杯第13届省赛

最新推荐文章于 2025-07-08 23:32:56 发布

原创最新推荐文章于 2025-07-08 23:32:56 发布 · 3.9k 阅读

本内容遵循CC 4.0 BY-SA版权协议

标签

#include <STC15F2K60S2.H>
#include <Seg.H>
#include <Buzzer.H>
#include <Timer0.H>
#include <Key.H>
#include <Led.H>
#include <DS1302.H>
#include <ONEWIRE.H>
#include <IIC.H>

unsigned char Key_Val,Key_Old,Key_Down,Key_Up;
unsigned char Key_Slow_Down;
unsigned char Seg_Slow_Down;
unsigned char Seg_Buf[]={10,10,10,10,10,10,10,10};
unsigned char Seg_Pos;
unsigned char Dot_Table[]={0,0,0,0,0,0,0,0};
unsigned char ucLed[]={0,0,0,0,0,0,0,0};
unsigned char ucRtc[]={0x23,0x59,0x50};
unsigned char Seg_Mode; //0-温度显示 1-时间显示 2-参数设置
float T;
float T_Set=23;
bit Control_Mode; //0-温度控制 1-时间控制
unsigned int Timer_5000ms;
bit Time_Control_Flag;
bit Led_Flag;
unsigned int Timer_50ms;

void Key_Proc()
{
   if(Key_Slow_Down) return;
   Key_Slow_Down=1;

   Key_Val=Key_Read();
   Key_Down=Key_Val&(Key_Val^Key_Old);
   Key_Up=~Key_Val&(Key_Val^Key_Old);
   Key_Old=Key_Val;

   if(Seg_Mode==1)
   {
       if(Key_Old==17)
       {
           Seg_Buf[3]=ucRtc[1]/16;
           Seg_Buf[4]=ucRtc[1]%16;
           Seg_Buf[6]=ucRtc[2]/16;
           Seg_Buf[7]=ucRtc[2]%16;
       }
       if(Key_Up==17)
       {
           Seg_Buf[3]=ucRtc[0]/16;
           Seg_Buf[4]=ucRtc[0]%16;
           Seg_Buf[6]=ucRtc[1]/16;
           Seg_Buf[7]=ucRtc[1]%16;
       }
   }


   switch (Key_Down)
   {
       case 12:    //模式切换
           if(++Seg_Mode==3)
               Seg_Mode=0;
       break;

       case 13:
           Control_Mode^=1;
       break;

       case 16: //+
           if(Seg_Mode==2)
           {
               T_Set++;
               if(T_Set==100)
                   T_Set=99;
           }
       break;

       case 17: //-
           if(Seg_Mode==2)
           {
               T_Set--;
               if(T_Set==9)
                   T_Set=10;
           }
       break;
   }
}

void Seg_Proc()
{
   if(Seg_Slow_Down) return;
   Seg_Slow_Down=1;

   T=T_Read();
   Read_Rtc(ucRtc);

   switch (Seg_Mode)
   {
       case 0:
           Seg_Buf[0]=11;
           Seg_Buf[1]=1;
           Seg_Buf[2]=10;
           Seg_Buf[3]=10;
           Seg_Buf[4]=10;
           Seg_Buf[5]=(int)(T*10)/100%10;
           Seg_Buf[6]=(int)(T*10)/10%10;
           Seg_Buf[7]=(int)(T*10)%10;
           Dot_Table[6]=1;
       break;

       case 1:
           Seg_Buf[0]=11;
           Seg_Buf[1]=2;
           Seg_Buf[2]=10;
           Seg_Buf[3]=ucRtc[0]/16;
           Seg_Buf[4]=ucRtc[0]%16;
           Seg_Buf[5]=12;
           Seg_Buf[6]=ucRtc[1]/16;
           Seg_Buf[7]=ucRtc[1]%16;
           Dot_Table[6]=0;
       break;

       case 2:
           Seg_Buf[0]=11;
           Seg_Buf[1]=3;
           Seg_Buf[2]=10;
           Seg_Buf[3]=10;
           Seg_Buf[4]=10;
           Seg_Buf[5]=10;
           Seg_Buf[6]=T_Set/10;
           Seg_Buf[7]=(int)T_Set%10;
       break;
   }

}

void Led_Proc()
{
   if(Control_Mode==0) //温度控制
   {
       ucLed[1]=1;
       if(T_Set<T)
       {
           Relay(1);
           ucLed[2]=Led_Flag?1:0;
       }
       else
       {
           Relay(0);
           ucLed[2]=0;
       }
   }
   if(Control_Mode==1) //时间控制
   {
       ucLed[1]=0;
       if(ucRtc[1]==0x00&&ucRtc[2]==0x00)
           Time_Control_Flag=1;
       if(Time_Control_Flag==1)
       {
           Relay(1);
           ucLed[0]=1;
           ucLed[2]=Led_Flag?1:0;
       }
       if(Time_Control_Flag==0)
       {
           Relay(0);
           ucLed[0]=0;
           ucLed[2]=0;
       }
   }
}

void Delay750ms(void)   //@12.000MHz
{
   unsigned char data i, j, k;
   i = 35;
   j = 51;
   k = 182;
   do
   {
       do
       {
           while (--k);
       } while (--j);
   } while (--i);
}

void main()
{
   T_Read();
   Delay750ms();
   Timer0_Init();
   Buzzer_Init();
   Set_Rtc(ucRtc);
while(1)
{
    Key_Proc();
       Seg_Proc();
       Led_Proc();
}
}

void Timer0_Routine() interrupt 1
{
   TL0 = 0x18;               //设置定时初始值
   TH0 = 0xFC;               //设置定时初始值
   if(++Key_Slow_Down==20) Key_Slow_Down=0;
   if(++Seg_Slow_Down==200) Seg_Slow_Down=0;
   if(++Seg_Pos==8) Seg_Pos=0;
   Seg_Disp(Seg_Pos+1,Seg_Buf[Seg_Pos],Dot_Table[Seg_Pos]);
Led_Disp(Seg_Pos+1,ucLed[Seg_Pos]);
   if(Time_Control_Flag==1)
   {
       if(++Timer_5000ms==5000)
       {
           Timer_5000ms=0;
           Time_Control_Flag=0;
       }
   }
   if(++Timer_50ms==50)
   {
       Timer_50ms=0;
       Led_Flag^=1;
   }
}