Could not find a package configuration file provided by “Qt5Qml“

安装ＱＴ５．４后，需要编译一个Ｃ＋＋程序。　Cmakelist 有find_package(Qt5Widgets REQUIRED)，cmake　报错如下：CMake Error at CMakeLists.txt:14 (find_package):  By not providing "FindQt5Widgets.cmake" in CMAKE_MODULE_PATH this projec...

编译软件时出现以下错误： By not providing "FindQt5.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "Qt5", but CMake did not find one. Could not find a package configuration file provided by "Qt5" with

最近在移植VLC-QT时自己编译源码时遇到如下问题：CMake Error at config/Dependencies.cmake:28 (FIND_PACKAGE):  By not providing "FindQt5Core.cmake" in CMAKE_MODULE_PATH this project has  asked CMake to find a package configu...

https://blog.csdn.net/qq_32768743/article/details/89057910

在使用CMake编译Qt 项目的时候，出现了一下错误。 记录一下解决方案，避免以后出现类似的问题。 CMake Error at /usr/lib/x86_64-linux-gnu/cmake/Qt5/Qt5Config.cmake:28 (find_package): Could not find a package configuration file provided by "Q...

Could not find a package configuration file provided by "ECM" 则执行。解决方法 yum -y install pam-devel。github 下载后cmake编译会出现一些依赖。缺少Qt5LinguistTools。

会思考，展特色，有内涵，擅表达，懂技巧。

Could not find a package configuration file provided by "Qt5Multimedia"

0. 环境 系统：ubuntu 16.04 LTS 机子：dell xps13 1. 步骤 1.1 编译 fcitx-qt5 源码 编译fcitx-qt需要cmake，安装cmake命令，如果已经安装，请略过; sudo apt-get install cmake 安装 fcitx-libs-dev; sudo apt-get install fcitx-libs-dev 设置qmake的环境变...

这个报错是下载的源码不完整，需要去GitHub下载完整的nanoflann，下载网址如下。这个报错是下载的源码不完整，需要去GitHub下载完整的qVoxFall，下载网址如下。出现这个报错需要手动修改Qt5LinguistTools DIR，将路径修改为。出现这个报错需要手动修改Qt5_DIR，将路径修改为。

问题描述 进行cmake时，会报如下错误 Could not find a package configuration file provided by "Qt5Widgets" with any of the following names: Qt5WidgetsConfig.cmake qt5widgets-config.cmake Add the installa...

报错:/usr/lib/x86_64-linux-gnu/cmake/Qt5/Qt5Config.cmake:26: error: Could not find a package configuration file provided by "Qt5XmlPatterns" with any of the following names: Qt5XmlPatternsConfig.cmake q...

报错图如下所示： 可以看到实际上就是找不到QT 两个cmake文件，解决方法他也告诉我们了，就是设置一个CMAKE_PREFIS_PATH即可。解决方案是在硬盘里搜索Qt5Config.cmake文件找到存放路径，如下所示： 设定到mingw文件夹即可，具体操作是在CMakeLists.txt文件的第一行添加如下的语句： set(CMAKE_PREFIX_PATH "C:\\Qt\\5.15.2\\mingw81_64\\") 于是再来一遍reload，就可以build了： END.

CMake Warning at cmake/OpenCVFindLibsGUI.cmake:18 (find_package): By not providing "FindQt5Core.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided b

CMake报错 CMake Error at CMakeLists.txt:67 (find_package): By not providing "FindQt5.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "Qt5", but CMake did not find one. Could not find a pack

Could not find a package configuration file provided by “Qt5” with any of the following names: 解决方法：在CMakeLists.txt文件加上以下路径 set(CMAKE_PREFIX_PATH "C:/Qt/Qt5.13.1/5.13.1/msvc2015_64/lib/cmake/Qt5") ...