华为ensp_MSTP、LACP、VRRP、DHCP、DHCP中继、NAT、OSPF、RIP技术实验（超详细，看必会）

最新推荐文章于 2026-06-07 05:27:42 发布

原创

最新推荐文章于 2026-06-07 05:27:42 发布 · 3.6k 阅读

博客内容仅提及了'ping'及'要求'，未给出更多关键信息。推测可能与网络中ping命令的使用要求有关。

在这里插入图片描述
要求：

R1：
<Huawei>u t m 
Info: Current terminal monitor is off.
<Huawei>sys 
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sys 
[Huawei]sysname R1
[R1]us 
[R1]user-int 
[R1]user-interface co 
[R1]user-interface console 0
[R1-ui-console0]id 
[R1-ui-console0]idle-timeout 0 0
[R1-ui-console0]q
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 10.0.0.1 24
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]ip add 11.0.0.1 24
[R1-GigabitEthernet0/0/1]int g0/0/2
[R1-GigabitEthernet0/0/2]ip add 12.0.0.1 24
[R1-GigabitEthernet0/0/2]ospf 
[R1-GigabitEthernet0/0/2]q
[R1]ospf 1
R1-ospf-1]area 0
[R1-ospf-1-area-0.0.0.0]net 
[R1-ospf-1-area-0.0.0.0]network 10.0.0.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 12.0.0.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 11.0.0.0 0.0.0.255
ospf-1-area-0.0.0.0]q
[R1-ospf-1]q
[R1]acl 3000
1-acl-adv-3000]rule permit ip source 192.168.10.0 0.0.0.255
[R1-acl-adv-3000]int g0/0/1
[R1-GigabitEthernet0/0/1]int g0/0/2
[R1-GigabitEthernet0/0/2]nat outbound 3000

在这里插入图片描述

**R2:**
<Huawei>u t m 
Info: Current terminal monitor is off.
<Huawei>sys 
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sys 
[Huawei]sysname R2
[R2]user-interface co 
[R2]user-interface console 0
[R2-ui-console0]idle-timeout 0 0
[R2-ui-console0]q
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 12.0.0.2 24
[R2-GigabitEthernet0/0/0]int g0/0/2
[R2-GigabitEthernet0/0/2]ip add 24.0.0.2 24
[R2-GigabitEthernet0/0/2]int g0/0/1
R2-GigabitEthernet0/0/1]ip add 23.0.0.2 24
[R2]dhcp enable 
Info: The operation may take a few seconds. Please wait for a moment.done.
[R2]ip pool 1
Info: It's successful to create an IP address pool.
[R2-ip-pool-1]gateway-list 192.168.40.1
[R2-ip-pool-1]network 192.168.40.0 mask 24
[R2-ip-pool-1]dns-list 8.8.8.8
R2-ip-pool-1]lease day 7
[R2-ip-pool-1]int g0/0/1
R2-GigabitEthernet0/0/1]dhcp select global 
[R2-GigabitEthernet0/0/1]q
[R2]ospf 1