[Work: 34] Doujinshi Binding: Original Design Laser Cut Processing
"DEAD END"
Circle: Nishimohigashimo, Nishi-sama
Cover Design: Rinne Design WORKS-sama (@RinNe_design)
"Maihime Color" was used for this order.
The cover paper, which has a pale, shimmering pearl-like finish, is "Shine Face 180kg Silver".
This is a new paper added to the set, replacing "Shine Face 180kg Gold," which was discontinued last year.
As you can see from the image, this order included a request for an original design laser cut on the fore-edge.
At Eiko, we offer both "Standard" laser cutting, which requires no design, and "Original Design" laser cutting.
If you wish to have the cut follow your artwork as in this case, it falls under "Original Design," and you will need to submit cut lines as shown above. If you can create a cut path, submitting it with the path is preferred, but if you create the cut lines using 0.3mm lines, we will adjust the data for you.
Please feel free to try it out by referring to the page below for more details.
*Regarding laser cutting...
Like foil stamping, there is some slight misalignment in the cutting position, so designs that are meant to align perfectly with color data will show this misalignment clearly.
Please keep this in mind when ordering, or consider a design that allows for some margin of error.
The flyleaf visible from the cut edge of the cover is "Azalai Gold 100kg."
This is paper used for the cover of "METAL Samba", but because it is a slightly thinner and softer paper, it is also suitable for smaller booklets A5 size or smaller, or book covers.
We used it for the flyleaf this time to take advantage of its texture.
It is a beautiful combination that contrasts the bright, soft yellow of the roses on the cover with the brassy, night-sand-like color of the flyleaf.
Set: Maihime Color
Cover Paper: Shine Face 180kg Silver
Flyleaf: Azalai Gold 100kg
Option: Laser Cut Processing (Original Design), Flyleaf Paper Change