[sdx12] QCA6174高通自带温控机制说明及脚本实现温控调节

原创已于 2023-04-21 12:31:37 修改 · 1.1k 阅读

标签

#网络 #linux

收录于

于 2023-04-17 17:31:42 首次发布

qsdk遇到问题及解决方案专栏收录该内容

105 篇文章 ¥129.90 ¥299.90

订阅专栏

超级会员免费看

本文详细介绍了高通QCA6174芯片的温控机制，包括四个温度阈值等级的配置、温控开关参数以及如何通过WCNSS_qcom_cfg.ini文件进行设置。此外，还讨论了如何使用iwpriv命令进行调试，并提到由于默认温控效果不明显，因此建议采用自定义脚本来实现更精确的温控管理。

QCA6174方案说明

Thermal mitigation on WLAN involves monitoring the temperature of the WLAN chip, detecting when a threshold is crossed, and taking necessary actions to reduce the temperature.
– Four levels of temperature threshold ranges are configured by the following WCNSS_qcom_cfg.ini file parameters (in /lib/firmware/wlan/qca_cld.) Based on the threshold range chosen, the WLAN driver controls bus idle time to throttle the throughput and reduce WLAN chip temperature.

– Level 0 range: gThermalTempMinLevel0, gThermalTempMaxLevel0
– Level 1 range: gThermalTempMinLevel1, gThermalTempMaxLevel1
– Level 2 range: gThermalTempMinLevel2, gThermalTempMaxLevel2
– Level 3 range: gThermalTempMinLevel3, gThermalTempMaxLevel3
– On QCA61x7(A), an o

了解本专栏