出现Failed to get convolution algorithm的解决方法

最新推荐文章于 2025-05-17 09:07:03 发布
转载 最新推荐文章于 2025-05-17 09:07:03 发布 · 3.5k 阅读 · 0 ·
本内容遵循CC 4.0 BY-SA版权协议
原文链接：http://www.cnblogs.com/darklights/p/10450414.html
标签
#python #人工智能 #开发工具
本文详细介绍了当使用卷积神经网络时遇到CUDA、cuDNN和TensorFlow版本匹配不一致的问题及解决方案。主要原因是TensorFlow版本过高，文章提供了具体的降级安装指令，帮助读者快速解决问题。

当运行卷积神经时出现了问题：Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above.

这一般就是cuda+cuDNN+TensorFlow的版本匹配不一致，当然大概率就是TensorFlow的版本过高了，降级即可：

sudo pip3 install --upgrade --force-reinstall tensorflow-gpu==1.9.0 --user

 

转载于:https://www.cnblogs.com/darklights/p/10450414.html

Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try…
01-06
使用inception-V3批处理文件retrain.bat进行预训练时，发现报错“Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try…”于是打开retrain.py文件，在前面加上如下代码： from tensorflow.compat.v1 import ConfigProto from tensorflow.compat.v1 import InteractiveSession config = ConfigProto() config.gpu_o
Failed to get convolution algorithm. This is probably because cuDNN failed..(TensorFlow和keras显存不足报错)
nohopenolove的博客
11-25 2246
在跑深度学习程序时，用到TensorFlow或者keras时候，经常会报一个错误： tensorflow.python.framework.errors_impl. UnknownError: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above.
完美解决问题：Failed to get convolution algorithm
CharlesMoCH的博客
11-04 1万+
写在前面 用pycharm或jupyter notebook运行卷积神经网络时会出现问题： Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above...
Failed to get convolution algorithm. This is probably because cuDNN failed to initialize解决办法
牧野渔樵
11-08 904
Failed to get convolution algorithm. This is probably because cuDNN failed to initialize解决办法 在网上看了很多说法，总结就两种情况： cudnn和tensorflow的版本不相符 GPU内存不足造成 第一种情况： 需要查出cuda、cudnn、tensorflow的版本对应关系，cuda版本只能是9.0,...
Error : Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so
胡侃有料的博客
03-05 627
every blog every motto: Brevity is the soul of wit 0. 前言 在用tensorflow 进行训练时，添加了如下代码： Error : Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to...
[tensorflow][keras]Failed to get convolution algorithm.解决方法
FL1623863129的博客
10-19 561
tneorflow-gpu 1.14或者1.13等版本经常有如下错误，这个不是你cuda安装有问题，而是显存不足造成，提示错误如下 Failed to get convolution algorithm. This is probably because cuDNN failed to initialize 对于tensorflow而言，代码前面加入下面代码可以解决问题 from tensorflow.compat.v1 import ConfigProto from tensorflow.co.
Failed to get convolution algorithm. This is probably because cuDNN failed to initialize解决方法
xiaotiig的博客
11-16 293
Failed to get convolution algorithm. This is probably because cuDNN failed to initialize解决方法 如果tensorflow-gpu的版本是2.0.0，那直接用下面这5句代码就可以解决 from tensorflow.compat.v1 import ConfigProto from tensorflow.compat.v1 import InteractiveSession config = ConfigProto()
maix_train本地训练出现“Failed to get convolution algorithm”的解决方法
qq_40500005的博客
01-29 2618
使用sipeed提供的maix_train进行k210本地模型训练的时候，出现了以下问题 2022-01-29 21:31:49,805 - [ERROR]: failed: TrainFailReason.ERROR_INTERNAL, error occurred when train, error: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try lo
Failed to get convolution algorithm. This is probably because cuDNN failed to initialize
qq_19950851的博客
12-28 329
最近在学tf2，训练模型的时候遇到以下错误： 解决方案如下（添加以下代码）： physical_devices = tf.config.experimental.list_physical_devices('GPU') assert len(physical_devices) > 0, "Not enough GPU hardware devices available" tf.config.experimental.set_memory_growth(physical_devices[0], Tr
tensorflow.python.framework.errors_impl.UnknownError: Failed to get convolution algorithm. 解决方法
Yl
02-18 9611
一、问题描述 在使用tensorflow-gpu时，出现下面的错误： tensorflow.python.framework.errors_impl.UnknownError: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to s...
tensorflow.python.framework.errors_impl.UnknownError: Failed to get convolution algorithm.的一种解决方法
scrence的博客
03-23 2156
2021-03-23 使用tensorflow构建卷积神经网络训练时出现这个错误tensorflow.python.framework.errors_impl.UnknownError: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above. ten.
报错：tensorflow.python.framework.errors_impl.UnknownError: Failed to get convolution algorithm.
燕芝沛然的博客
01-17 1399
UnknownError: Failed to get convolution algorithm. 运行sess.run() 错误行标定这一行：sess.run(optimizer, feed_dict={ x: batch_x, y: batch_y, keep_prob: dropout } 显示错误信息：tensorflow.python.framework.errors_impl.Unk...
【Python/Pytorch - Bug】--UnknownError (see above for traceback): Failed to get convolution algorithm.
银尘博客
08-11 566
Tensorflow报错：UnknownError (see above for traceback): Failed to get convolution algorithm.原因就是显卡内存不够，选择合适显卡内存就可以解决问题。1、gpustat查看显卡使用情况；2、选择内存足够显卡即可；
TensorFlow报错「Failed to get convolution algorithm」：CUDA内核编译与硬件加速的优化
最新发布
shejizuopin的博客
05-17 1153
在深度学习模型训练中，TensorFlow用户常遇到Failed to get convolution algorithm错误，通常与CUDA/cuDNN初始化失败或硬件资源不足有关。本文系统性解析了该错误的成因，并提供了从环境配置到代码优化的完整解决方案。首先，检查并修复CUDA/cuDNN版本兼容性，确保TensorFlow与CUDA/cuDNN版本匹配。其次，优化GPU显存分配，通过按需分配显存、限制显存占用比例或指定GPU设备来避免显存溢出。此外，启用混合精度训练可以显著降低显存占用并提升训练速度。
解决报错：tensorflow.python.framework.errors_impl.UnknownError: Failed to get convolution algorithm.
热门推荐
个人博客
04-10 2万+
早上在使用tensorflow时报了下面的错： 2019-04-10 10:19:31.648250: I tensorflow/core/platform/cpu_feature_guard.cc:141] Your CPU supports instructions that this TensorFlow binary was not compiled to use: AVX AVX2 20...
tensorflow.python.framework.errors_impl.UnknownError: Failed to get convolution algorithm.
Yk_0311的博客
06-01 724
解决报错：tensorflow.python.framework.errors_impl.UnknownError: Failed to get convolution algorithm. 错误 解决办法 升级CuDNN 根据输出窗口的提示 这里说明需要更高版本的CuDNN 以我为例这里提示我，我的环境中的CuDNN是7.4.1，不满足环境需求。之后我将CuDNN升级到7.6.5，将问题解决。 如何升级？可以参考其他博主的文章。 ...
【已解决】keras训练时遇到Unknown: Failed to get convolution algorithm.
栗子的博客
09-18 4410
运行卷积神经时出现了问题： tensorflow.python.framework.errors_impl.UnknownError: 2 root error(s) found. (0) **Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值