dpdk uio

root@gobgp:~# lspci | grep -i ether

01:00.0 Ethernet controller: Red Hat, Inc. Virtio network device (rev 01)

07:00.0 Ethernet controller: Red Hat, Inc. Virtio network device (rev 01)

root@gobgp:~# lspci -s 07:00.0

07:00.0 Ethernet controller: Red Hat, Inc. Virtio network device (rev 01)

root@gobgp:~# lspci -s 07:00.0 -v

07:00.0 Ethernet controller: Red Hat, Inc. Virtio network device (rev 01)

Subsystem: Red Hat, Inc. Virtio network device

Physical Slot: 0-6

Flags: bus master, fast devsel, latency 0, IRQ 38

Memory at 10c40000 (32-bit, non-prefetchable) [size=4K]

Memory at 8000c00000 (64-bit, prefetchable) [size=16K]

Expansion ROM at 10c00000 [disabled] [size=256K]

Capabilities: [dc] MSI-X: Enable- Count=3 Masked-

Capabilities: [c8] Vendor Specific Information: VirtIO: <unknown>

Capabilities: [b4] Vendor Specific Information: VirtIO: Notify

Capabilities: [a4] Vendor Specific Information: VirtIO: DeviceCfg

Capabilities: [94] Vendor Specific Information: VirtIO: ISR

Capabilities: [84] Vendor Specific Information: VirtIO: CommonCfg

Capabilities: [7c] Power Management version 3

Capabilities: [40] Express Endpoint, MSI 00

Kernel driver in use: uio_pci_generic

​

root@gobgp:~#

root@gobgp:~# cat /sys/bus/pci/drivers/uio_pci_generic/bind

cat: /sys/bus/pci/drivers/uio_pci_generic/bind: Permission denied

root@gobgp:~# ls -l /sys/bus/pci/devices/0000\:07\:00.0

lrwxrwxrwx 1 root root 0 Aug 24 14:20 /sys/bus/pci/devices/0000:07:00.0 -> ../../../devices/pci0000:00/0000:00:01.6/0000:07:00.0

root@gobgp:~# ls -l /sys/bus/pci/devices/0000\:07\:00.0/driver

lrwxrwxrwx 1 root root 0 Aug 24 14:20 /sys/bus/pci/devices/0000:07:00.0/driver -> ../../../../bus/pci/drivers/uio_pci_generic

root@gobgp:~#

root@gobgp:~# cat /dev/uio0

cat: /dev/uio0: Invalid argument

root@gobgp:~#

Example code using uio_pci_generic

Here is some sample userspace driver code using uio_pci_generic:

​

#include <stdlib.h>

#include <stdio.h>

#include <unistd.h>

#include <sys/types.h>

#include <sys/stat.h>

#include <fcntl.h>

#include <errno.h>

​

int main()

{

int uiofd;

int configfd;

int err;

int i;

unsigned icount;

unsigned char command_high;

​

uiofd = open("/dev/uio0", O_RDONLY);

if (uiofd < 0) {

perror("uio open:");

return errno;

}

configfd = open("/sys/class/uio/uio0/device/config", O_RDWR);

if (configfd < 0) {

perror("config open:");

return errno;

}

​

/* Read and cache command value */

err = pread(configfd, &command_high, 1, 5);

if (err != 1) {

perror("command config read:");

return errno;

}

command_high &= ~0x4;

​

for(i = 0;; ++i) {

/* Print out a message, for debugging. */

if (i == 0)

fprintf(stderr, "Started uio test driver.\n");

else

fprintf(stderr, "Interrupts: %d\n", icount);

​

/****************************************/

/* Here we got an interrupt from the

device. Do something to it.