Platform Builder: Disable the USB Driver Dialog .

转载于 2013-04-19 11:23:13 发布 · 521 阅读

WINCE_驱动_USB 专栏收录该内容

66 篇文章

订阅专栏

文章详细介绍了如何通过设置注册表值来禁用Windows CE当插入未知USB设备时显示的驱动对话框，特别是针对打印机等设备，它们可能暴露多个功能到总线上，而没有对应的Windows CE驱动支持。

http://blog.csdn.net/androidfan/article/details/5788812

For a long time, Windows CE developers and users have wanted to disable the USB Driver Dialog that is displayed when an unknown USB device is plugged into the host controller. Of course the question is always why would you want to do such a thing? The simple answer is that there are USB devices that are needed, like printers, which expose multiple functions to the bus, like scanners and faxes, which no Windows CE driver exists to support. So the printer quietly loads a driver, but then the other functions cause a dialog to be shown.

One solution is to create a USB Class driver that loads by default if no other driver has been loaded. This driver just accepts anything that it sees and then does nothing with it.

Starting with the Windows Embedded CE 6.0 R3 March QFE/update, the USB 2.0 driver has a registry value to disable the dialog:

[HKEY_LOCAL_MACHINE/Drivers/USB/LoadClients]
"DoNotPromptUser"=dword:0

Setting the DoNotPromptUser value to 1 disables the dialog. The default value is zero, so the driver continues to behave in the same way it always did unless you change this registry value.