H3C交换机 IRF配置

最新推荐文章于 2026-04-14 09:34:34 发布

原创最新推荐文章于 2026-04-14 09:34:34 发布 · 2.2k 阅读

13 ·

本内容遵循CC 4.0 BY-SA版权协议

GEO检测

标签

#网络

文章详细描述了如何在H3C设备上进行IRF（InterconnectRedundancyFramework）配置，包括成员ID优先级设置、端口组、桥MAC管理，以及BFD（BidirectionalForwardingDetection）和MAD（Multi-AccessDevice）的配置过程和验证方法。

主设备配置：


sys
#
interface  range  Ten-GigabitEthernet  1/0/49 to  Ten-GigabitEthernet 1/0/52        #进入端口Ten-GigabitEthernet 1/0/49 to Ten-GigabitEthernet 1/0/52 批量配置组中
# 
shutdown
#
quit
#
irf member 1 priority  32                                                            #配置当前的irf成员id1的优先级为32（最高等级32，默认为1）
#
irf-port 1/1
#
port group  interface  Ten-GigabitEthernet  1/0/49
#
port group  interface  Ten-GigabitEthernet  1/0/50
#
port group  interface  Ten-GigabitEthernet  1/0/51
#
port group  interface  Ten-GigabitEthernet  1/0/52
#
quit
#
irf-port-configuration active                                                           #提示说：必须使用命令"irf-port-configuration active" 激活irf端口配置
#
interface range Ten-GigabitEthernet  1/0/49 to Ten-GigabitEthernet  1/0/52
#
undo shutdown
#
save

从设备配置：

sys
#
irf member 1 renumber  2                                                                #首先我们将当前的irf成员id1重命名为2
#
quit
#
reboot
#
sys
#
interface  range Ten-GigabitEthernet  2/0/49 to  Ten-GigabitEthernet  2/0/52            #进入端口Ten-GigabitEthernet 1/0/49 to Ten-GigabitEthernet 1/0/52 批量配置组中
#
shutdown
#
irf member 2 priority  1                                                                #配置当前的irf成员id2的优先级为1（最高等级32，默认为1）
#
irf-port 2/2
#
port group  interface Ten-GigabitEthernet  2/0/49
#
port group  interface Ten-GigabitEthernet  2/0/50
#
port group  interface Ten-GigabitEthernet  2/0/51
#
port group  interface Ten-GigabitEthernet  2/0/52
#
quit
#
irf-port-configuration active                                                            #提示说：必须使用命令"irf-port-configuration active" 激活irf端口配置
#
interface  range Ten-GigabitEthernet  2/0/49 to Ten-GigabitEthernet  2/0/52
#
undo  shutdown
#
quit
#
save

查看IRF配置情况：

[H3C]dis irf
MemberID    Role    Priority  CPU-Mac         Description
*+2        Master  1         58ab-8bfb-0204  ---
--------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.


The bridge MAC of the IRF is: 58ab-8bfb-0200
Auto upgrade                : yes
Mac persistent              : 6 min
Domain ID                   : 0

配置完成后查看配置信息：

<H3C>dis irf
MemberID    Role    Priority  CPU-Mac         Description
*+1        Master  1         58ab-818c-0104  ---
   2        Standby 1         58ab-8bfb-0204  ---
--------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.


The bridge MAC of the IRF is: 58ab-818c-0100
Auto upgrade                : yes
Mac persistent              : 6 min
Domain ID                   : 0

配置bfd mad

配置bfd mad
[SW1]interface Route-Aggregation 1024
[SW1]int range GigabitEthernet 1/0/48 GigabitEthernet 2/0/48
[SW1-if-range]p l r
[SW1-if-range]port link-aggregation group 1024


[SW1]interface Route-Aggregation 1024
[SW1-Route-Aggregation1024]mad bfd enable
[SW1-Route-Aggregation1024]mad ip address 1.1.1.1 30 member 1
[SW1-Route-Aggregation1024]mad ip address 1.1.1.2 30 member 2


##############其他mad配置方法2######################################################

vlan 4090
description MAD

interface GigabitEthernet1/0/48
port access vlan 4090
undo stp enable

interface GigabitEthernet2/0/48
port access vlan 4090
undo stp enable

interface Vlan-interface4090
mad bfd enable
mad ip address 1.1.1.1 255.255.255.252 member 1
mad ip address 1.1.1.2 255.255.255.252 member 2

验证
[SW1]display mad verbose //查看MAD的状态
[SW1]display irf link //显示IRF链路信息
[SW1]display irf configuration //显示IRF配置信息