如何在笔记本上将地图缩小_在Windows XP上将Recovery Console作为启动菜单选项安装

如何在笔记本上将地图缩小

When you have a problem with your Windows computer, you’ll usually be told to insert the Windows cdrom and then start the Recovery Console in order to fix the issue. So where did you put that XP disc anyway? Why can’t we just install the recovery console to the hard drive?

如果您的Windows计算机有问题，通常会提示您插入Windows cdrom，然后启动故障恢复控制台以解决该问题。 那么，您将XP光盘放在何处？ 为什么我们不能仅将故障恢复控制台安装到硬盘驱动器？

As it turns out, you can indeed install the recovery console as a boot menu option. This won’t help if your computer doesn’t boot at all, but in many cases you’ll find it useful.

事实证明，您确实可以将故障恢复控制台安装为启动菜单选项。 如果您的计算机根本无法启动，这将无济于事，但在许多情况下，您会发现它很有用。

Note: If you have a dual-boot setup with Windows Vista, there’s a chance that installing this would screw up booting into Vista, so don’t use this until I can confirm otherwise.

注意：如果您使用Windows Vista进行双启动安装，则安装此驱动程序可能会加紧启动Vista的操作，因此，除非可以确认，否则请不要使用它。

Installing Recovery Console to the Hard Drive

将故障恢复控制台安装到硬盘驱动器

First you’ll need to insert your Windows XP cdrom into the drive. It’s important to note that your cdrom version of XP has to match the version of XP that you have installed. So if you have SP2 installed but your cd is for SP1, you’ll need to read this Microsoft KB article.

首先，您需要将Windows XP cdrom插入驱动器。 重要的是要注意，您的CDROM版本的XP必须与您安装的XP的版本匹配。 因此，如果您安装了SP2，但CD是用于SP1的，则需要阅读此Microsoft KB文章 。

Open up the Start \ Run dialog, and then type in the following command, adjusting the drive letter to match your cdrom drive:

打开“开始\运行”对话框，然后键入以下命令，调整驱动器号以匹配您的cdrom驱动器：

d:\i386\winnt32.exe /cmdcons

d：\ i386 \ winnt32.exe / cmdcons

You’ll be prompted with a really wide dialog box to confirm that you really want to do this.

系统将提示您一个非常宽的对话框，以确认您确实要执行此操作。

The installation will think for a minute…

安装会花一分钟的时间…

And then you’ll get a prompt that the installation was successful (hopefully).

然后会提示您安装成功(希望如此)。

If you have problems installing this, you’ll want to check out this Microsoft KB article.

如果您在安装此程序时遇到问题，则需要查看此Microsoft KB文章 。

Accessing the Recovery Console

访问故障恢复控制台

Once you have the recovery console installed, you can restart your computer and you should see it in the list of boot option choices:

一旦安装了故障恢复控制台，就可以重新启动计算机，并且应该在引导选项选择列表中看到它：

Once the console loads up, it will ask you which installation you’d like to logon to. You’ll have to type the number, in this case you would type “1”, and then be prompted for the administrator password.

控制台加载完毕后，它将询问您要登录的安装。 您必须输入数字，在这种情况下，您将输入“ 1”，然后提示您输入管理员密码。

Type HELP at the command prompt to see a list of all the commands.

在命令提示符下键入HELP以查看所有命令的列表。

I won’t go into detail about how to use the console, as that’s really a separate article altogether.

我不会详细介绍如何使用控制台，因为这完全是另一篇单独的文章。

Change the Boot Menu Timeout

更改启动菜单超时

After you install this, you’ll suddenly notice that your computer waits at the boot menu for 30 seconds. To change this timeout, either right-click on My Computer and choose Properties or use the Win+Break shortcut key.

安装此程序后，您会突然发现计算机在启动菜单上等待30秒。 若要更改此超时，请右键单击“我的电脑”，然后选择“属性”，或使用Win + Break快捷键。

Select the Advanced tab, and then the Settings button under Startup and Recovery:

选择“高级”选项卡，然后选择“启动和恢复”下的“设置”按钮：

Now you can change the timeout value down to something more reasonable, like 5 seconds or so.

现在，您可以将超时值更改为更合理的值，例如5秒左右。

If you click on the Edit button you’ll see the boot.ini file, where you can see the new line for the recovery console.

如果单击“编辑”按钮，您将看到boot.ini文件，在该文件中可以看到故障恢复控制台的新行。

If you don’t know what you are doing, don’t edit this file… or you’d actually need the install cd to fix it =)

如果您不知道自己在做什么，请不要编辑此文件…或者您实际上需要安装CD才能修复它=)

翻译自: https://www.howtogeek.com/howto/windows/install-recovery-console-as-a-boot-menu-option-on-windows-xp/

如何在笔记本上将地图缩小