旋转冷却器是物料煅烧生产线的关键设备，用于通过旋转运动加热交换空气来冷却从回转窑出来的高温煅烧物料，使其温度降至200度以下。该设备结构简单，操作高效，维护容易，广泛应用于建筑、化学、冶金工业，与回转窑匹配使用，正常安装坡度为3.5%，物料从圆筒高侧进入，在低速运行下，通过提升板将物料抛起、落下，冷却后的物料从圆筒低侧排出。
Introduction of Rotary Cooler:
Rotary Cooler is the key equipment of the material calcination line, The rotary Cooler is used to cool the high temperature calcinated material from the rotary kiln, The material temperature will low down to < 200 degree after the air heating exchange through Cooler rotation movement. rotary kiln: http://www.zk-kiln.com/products/984.html
Structure of Rotary Cooler:
Rotary Cooler has simple structure, high efficient operation, easy to maintenance etc advantages. Rotary Kiln is widely used in building , chemical , metallurgy industries. It is matched with rotary kiln, The normal installation slope is 3.5%. The material will feed into the rotary Cooler from the higher side of the cylinder under the low speed operation. The lifting plate inside the Cooler will elve, fling and move down the cooling material, then cooled material will come out from cooler cylinder low size.
Working Principle of Rotary Cooler:
In the natural situation, the slope of Cooler cylinder is 3.5% to 5%, keeping low-speed rotation. The material is feeding from end of Cylinder (high side), circular lifting plate keeping the materials scatter lifting and moving down. Cooling material is discharged from the low end, and preheated air is sending into the rotary kiln for calcinations.
Other related products:
Rotary Kiln: http://www.zk-kiln.com
Vertical Preheater: http://www.zk-kiln.com/products/992.html
Rotary Dryer: http://www.lime-mill.com/rotary-dryer/
Ball Mill: http://www.lime-mill.com/ball-mill/
Rotary Cooler is the key equipment of the material calcination line, The rotary Cooler is used to cool the high temperature calcinated material from the rotary kiln, The material temperature will low down to < 200 degree after the air heating exchange through Cooler rotation movement. rotary kiln: http://www.zk-kiln.com/products/984.html
Structure of Rotary Cooler:
Rotary Cooler has simple structure, high efficient operation, easy to maintenance etc advantages. Rotary Kiln is widely used in building , chemical , metallurgy industries. It is matched with rotary kiln, The normal installation slope is 3.5%. The material will feed into the rotary Cooler from the higher side of the cylinder under the low speed operation. The lifting plate inside the Cooler will elve, fling and move down the cooling material, then cooled material will come out from cooler cylinder low size.
Working Principle of Rotary Cooler:
In the natural situation, the slope of Cooler cylinder is 3.5% to 5%, keeping low-speed rotation. The material is feeding from end of Cylinder (high side), circular lifting plate keeping the materials scatter lifting and moving down. Cooling material is discharged from the low end, and preheated air is sending into the rotary kiln for calcinations.
Other related products:
Rotary Kiln: http://www.zk-kiln.com
Vertical Preheater: http://www.zk-kiln.com/products/992.html
Rotary Dryer: http://www.lime-mill.com/rotary-dryer/
Ball Mill: http://www.lime-mill.com/ball-mill/
来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/29097739/viewspace-1061665/，如需转载，请注明出处，否则将追究法律责任。
转载于:http://blog.itpub.net/29097739/viewspace-1061665/
扫一扫
613
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
