常用window网络API

AddIPAddress

This function adds the specified IP address to the specified adapter.

给指定的网卡添加指定的IP地址

CreateIpForwardEntry

This function creates a route in the local computer's IP routing table.

在本地路由表中创建一个路线

CreateIpNetEntry

This function creates an Address Resolution Protocol (ARP) entry in the ARP table on the local computer.

在本地计算机上创建一个地址ARP协议(决议)进入ARP表

CreateProxyArpEntry

This function creates a Proxy Address Resolution Protocol (PARP) entry on the local computer for the specified IP address.

在本地计算机上为指定的IP地址创建一个(决议协议PARP)代理地址

DeleteIPAddress

Use this function to delete an IP address that was previously added using AddIPAddress.

删除由AddIPAddress影响的东西

DeleteIpForwardEntry

This function deletes an existing route in the local computer's IP routing table.

删除由CreateIpForwardEntry影响的东西

DeleteIpNetEntry

This function deletes an ARP entry from the ARP table on the local computer.

删除由CreateIpNetEntry影响的东西

DeleteProxyArpEntry

This function deletes the PARP entry on the local computer specified by the dwAddress and dwIfIndex parameters.

删除由CreateProxyArpEntry影响的东西

FlushIpNetTable

This function deletes all ARP entries for the specified interface from the ARP table on the local computer.

在本地计算机上删除所有ARP作品中指定的接口ARP表

GetAdapterIndex

This function obtains the index of an adapter, given its name.

由id获取适配器名字

GetAdaptersAddresses

This function retrieves the addresses associated with the adapters on the local computer.

由地址获取适配器

GetAdaptersInfo

This function retrieves adapter information for the local computer. This function is deprecated in favor of GetAdaptersAddresses.

获取适配器信息

GetBestInterface

This function retrieves the index of the interface that has the best route to the specified IP address.

获取到达指定ip的最优路由路径

GetBestInterfaceEx

This function retrieves the index of the interface that has the best route to the specified IP address.

获取到达指定ip的最优路由路径

GetBestRoute

This function retrieves the best route to the specified destination IP address.

获取到达指定ip的最优路由

GetFriendlyIfIndex

This function takes an interface index and returns a backward-compatible interface index, that is, one that uses only the lower 24 bits.

获取接口指标即backward-compatible,只有用较低的24位。

GetIcmpStatistics

This function retrieves the Internet Control Message Protocol (ICMP) statistics for the local computer.

获取本地(ICMP)信息

GetIcmpStatisticsEx

This function retrieves the Internet Control Message Protocol (ICMP) statistics for the current computer.

获取本地(ICMP)信息

GetIfEntry

This function retrieves information for the specified interface on the local computer.

获取网络接口信息

GetIfTable

This function retrieves the MIB-II interface table.

获取网络流量信息

GetInterfaceInfo

This function obtains a list of the network interface adapters on the local system.

获得本地网卡信息

GetIpAddrTable

This function retrieves the interface–to–IP address mapping table.

获IP映射信息

GetIpForwardTable

This function retrieves the IP routing table.

获取IP路由信息

GetIpNetTable

This function retrieves the IP-to-physical address mapping table.

获取IP到硬件地址映射信息

GetIpStatistics

This function retrieves the IP statistics for the current computer.

获取IP相关信息

GetIpStatisticsEx

This function retrieves the Internet Protocol (IP) statistics for the current computer.

获取IP相关信息

GetNetworkParams

This function retrieves network parameters for the local computer.

获取本地网络参数

GetNumberOfInterfaces

This function retrieves the number of interfaces on the local computer.

获取本地网络接口数量

GetPerAdapterInfo

This function retrieves information about the adapter corresponding to the specified interface.

获取接口对应的适配器信息

GetRTTAndHopCount

This function determines the round-trip time (RTT) and hop count to the specified destination.

获取到达指定地的往返时间(RTT)和跳跃数

GetTcpStatistics

This function retrieves the TCP statistics for the local computer.

获得本地TCP信息

GetTcpStatisticsEx

This function retrieves the Transmission Control Protocol (TCP) statistics for the current computer.

获得本地TCP信息

GetTcpTable

This function retrieves the TCP connection table.

获取TCP连接映射信息

GetUdpStatistics

This function retrieves the User Datagram Protocol (UDP) statistics for the local computer.

获得本地UDP信息

GetUdpStatisticsEx

This function retrieves the User Datagram Protocol (UDP) statistics for the current computer.

获得本地UDP信息

GetUdpTable

This function retrieves the User Datagram Protocol (UDP) listener table.

获取UDP连接映射信息

GetUniDirectionalAdapterInfo

This function retrieves information about the unidirectional adapters installed on the local computer.

获取单项适配器信息

IpReleaseAddress

This function releases an IP address previously obtained through Dynamic Host Configuration Protocol (DHCP).

通过动态主机配置协议(DHCP)释放一个之前获得的IP地址

IpRenewAddress

This function renews a lease on an IP address previously obtained through Dynamic Host Configuration Protocol (DHCP).

通过动态主机配置协议(DHCP)更新租赁一个之前得到的IP地址

NotifyAddrChange

This function causes a notification to be sent to the caller whenever a change occurs in the table that maps IP addresses to interfaces.

指定IP发生改变时获取通知

NotifyRouteChange

This function causes a notification to be sent to the caller whenever a change occurs in the IP routing table.

指定IP路由发生改变时获取通知

SendARP

This function sends an ARP request to obtain the physical address that corresponds to the specified destination IP address.

向指定IP发起ARP请求得到其对应的物理地址

SetIfEntry

This function is used to set the administrative status of an interface.

设置网络接口

SetIpForwardEntry

This function modifies an existing route in the local computer's IP routing table. It can also add a new route to the routing table.

为IP设置一个新的路由表

SetIpNetEntry

This function modifies an existing ARP entry in the ARP table on the local computer.

设置新的IP和物理地址映射表

SetIpStatistics

This function toggles IP forwarding on or off and sets the default time-to-live (TTL) value for the local computer.

切换本地的IP数据包转发开关和设置默认的生存时间(TTL)

SetIpTTL

This function sets the default time-to-live (TTL) value for the local computer.

设置默认的生存时间(TTL)

SetTcpEntry

This function sets the state of a TCP connection.

设置TCP连接状态