Mirroring an Existing LVM Volume is pretty straightforward. Assuming you have enough space for it on separate physical volumes, it is a single command. According to the documentation, you will find two varieties. One is just called mirror, the other raid1. The documentation recommends using raid1, so that is what I will cover.
There are a few reasons you may wish to use an LVM mirror. One is protecting data from drive failures. Another is better read performance, as your system can read different data from different devices.
Creating the mirror is simple. Assuming you have enough space on another PV for the LV in question, it is a single command.
# lvconvert --type raid1 -m 1 /dev/mapper/volume-nameThe -m 1 part means the number of additional copies of the LV should be maintained. Using -m 1 means you will have TWO copies of your data. If you use -m 2, you will have THREE copies.
As usual with my guides, I will work through an example.
Example Scenario
I am going to convert a LV called zabbix on a VG called pgdata into a raid1 logical volume. First, I will add a disk to the volume group. Then I will covert the LV.
Here is the starting configuration:
# pvdisplay -s
Device "/dev/sdb" has a capacity of 520.00 MiB
# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 20G 0 disk
├─sda1 8:1 0 19.1G 0 part /
├─sda2 8:2 0 1K 0 part
└─sda5 8:5 0 880M 0 part [SWAP]
sdb 8:16 0 1G 0 disk
└─pgdata-zabbix 254:0 0 500M 0 lvm /zabbix
sdc 8:32 0 1G 0 disk
sdd 8:48 0 1G 0 disk
sr0 11:0 1 1024M 0 rom
# vgdisplay -s
"pgdata" 1020.00 MiB [500.00 MiB used / 520.00 MiB free]
# lvs -o lv_name,vg_name,lv_size,lv_layout
LV VG LSize Layout
zabbix pgdata 500.00m linear As you can see, there is currently one PV, sdb.
Create the Mirror
If you don’t have a device with sufficient space, add one. As you can see, when I tried to do it without sufficient space, LVM outputs an error. In the example, I started with a single PV, so I add another:
# lvconvert --type raid1 -y -m 1 /dev/mapper/pgdata-zabbix
Insufficient suitable allocatable extents for logical volume : 126 more required
# pvcreate /dev/sdc
Physical volume "/dev/sdc" successfully created.
# vgextend pgdata /dev/sdc
Volume group "pgdata" successfully extendedNow I modify the LV so it is a raid1:
# lvconvert --type raid1 -m 1 /dev/mapper/pgdata-zabbix
Are you sure you want to convert linear LV pgdata/zabbix to raid1 with 2 images
enhancing resilience? [y/n]: y
Logical volume pgdata/zabbix successfully converted.
# lvs -o lv_name,vg_name,lv_size,lv_layout
LV VG LSize Layout
zabbix pgdata 500.00m raid,raid1
# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 20G 0 disk
├─sda1 8:1 0 19.1G 0 part /
├─sda2 8:2 0 1K 0 part
└─sda5 8:5 0 880M 0 part [SWAP]
sdb 8:16 0 1G 0 disk
├─pgdata-zabbix_rmeta_0 254:5 0 4M 0 lvm
│ └─pgdata-zabbix 254:4 0 500M 0 lvm /zabbix
└─pgdata-zabbix_rimage_0 254:6 0 500M 0 lvm
└─pgdata-zabbix 254:4 0 500M 0 lvm /zabbix
sdc 8:32 0 1G 0 disk
├─pgdata-zabbix_rmeta_1 254:2 0 4M 0 lvm
│ └─pgdata-zabbix 254:4 0 500M 0 lvm /zabbix
└─pgdata-zabbix_rimage_1 254:3 0 500M 0 lvm
└─pgdata-zabbix 254:4 0 500M 0 lvm /zabbix
sdd 8:48 0 1G 0 disk
sr0 11:0 1 1024M 0 rom Notice how the zabbix LV is now showing on two different block devices.
Adding/Removing Mirrors
If you wish to add another device to create a three way mirror, just follow the same steps and add modify the copy count:
# pvcreate /dev/sdd
Physical volume "/dev/sdd" successfully created.
# vgextend pgdata /dev/sdd
Volume group "pgdata" successfully extended
# lvconvert --type raid1 -y -m 2 /dev/mapper/pgdata-zabbix
Logical volume pgdata/zabbix successfully converted.
# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 20G 0 disk
├─sda1 8:1 0 19.1G 0 part /
├─sda2 8:2 0 1K 0 part
└─sda5 8:5 0 880M 0 part [SWAP]
sdb 8:16 0 1G 0 disk
├─pgdata-zabbix_rmeta_0 254:1 0 4M 0 lvm
│ └─pgdata-zabbix 254:0 0 500M 0 lvm /zabbix
└─pgdata-zabbix_rimage_0 254:2 0 500M 0 lvm
└─pgdata-zabbix 254:0 0 500M 0 lvm /zabbix
sdc 8:32 0 1G 0 disk
├─pgdata-zabbix_rmeta_1 254:3 0 4M 0 lvm
│ └─pgdata-zabbix 254:0 0 500M 0 lvm /zabbix
└─pgdata-zabbix_rimage_1 254:4 0 500M 0 lvm
└─pgdata-zabbix 254:0 0 500M 0 lvm /zabbix
sdd 8:48 0 1G 0 disk
├─pgdata-zabbix_rmeta_2 254:5 0 4M 0 lvm
│ └─pgdata-zabbix 254:0 0 500M 0 lvm /zabbix
└─pgdata-zabbix_rimage_2 254:6 0 500M 0 lvm
└─pgdata-zabbix 254:0 0 500M 0 lvm /zabbix
sr0 11:0 1 1024M 0 rom You can remove mirrors too:
# lvconvert --type raid1 -y -m 1 /dev/mapper/pgdata-zabbix
Logical volume pgdata/zabbix successfully converted.
# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 20G 0 disk
├─sda1 8:1 0 19.1G 0 part /
├─sda2 8:2 0 1K 0 part
└─sda5 8:5 0 880M 0 part [SWAP]
sdb 8:16 0 1G 0 disk
├─pgdata-zabbix_rmeta_0 254:1 0 4M 0 lvm
│ └─pgdata-zabbix 254:0 0 500M 0 lvm /zabbix
└─pgdata-zabbix_rimage_0 254:2 0 500M 0 lvm
└─pgdata-zabbix 254:0 0 500M 0 lvm /zabbix
sdc 8:32 0 1G 0 disk
├─pgdata-zabbix_rmeta_1 254:3 0 4M 0 lvm
│ └─pgdata-zabbix 254:0 0 500M 0 lvm /zabbix
└─pgdata-zabbix_rimage_1 254:4 0 500M 0 lvm
└─pgdata-zabbix 254:0 0 500M 0 lvm /zabbix
sdd 8:48 0 1G 0 disk
sr0 11:0 1 1024M 0 rom If you wish, you can even go back to a simple linear volume:
# lvconvert --type linear -y /dev/mapper/pgdata-zabbix
Logical volume pgdata/zabbix successfully converted.
# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 20G 0 disk
├─sda1 8:1 0 19.1G 0 part /
├─sda2 8:2 0 1K 0 part
└─sda5 8:5 0 880M 0 part [SWAP]
sdb 8:16 0 1G 0 disk
└─pgdata-zabbix 254:0 0 500M 0 lvm /zabbix
sdc 8:32 0 1G 0 disk
sdd 8:48 0 1G 0 disk
sr0 11:0 1 1024M 0 rom 
扫一扫
1022
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
