RK平台设置pm_domains常开和clk常开

最新推荐文章于 2026-06-13 13:12:36 发布

原创最新推荐文章于 2026-06-13 13:12:36 发布 · 724 阅读 ·

本内容遵循CC 4.0 BY-SA版权协议

IMGDX

关注

标签

#linux

分类嵌入式与硬件开发

内核调试专栏收录该内容

2 篇文章

订阅专栏

当遇到RockchipRK3588平台的性能或状态不稳定时，可以通过在DTS中修改代码设置pm_domains和clk_gate为always_on来提高系统稳定性，此方法常用于调试。同时，为避免GPU异常，需确保VDD供电也设置为常开状态。

通常在板子性能或者状态不稳定的时候会通过设置pm_domains常开和clk常开提高稳定性，一般用于调试。

1，修改代码：

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-android.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-android.dtsi
index 9996bae70aba1..b97a086af5549 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-android.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-android.dtsi
@@ -6,7 +6,7 @@
/ {
chosen: chosen {
- bootargs = "earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0";
+ bootargs = "earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 clk_gate.always_on=1 pm_domains.always_on=1";
};

2，通过adb 敲命令的方式：

echo 1 > /sys/module/pm_domains/parameters/always_on
echo 1 > /sys/module/clk_gate/parameters/always_on

注意：
设置pd常开可能导致gpu报错异常，需要将vdd供电也设置常开。

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rk806-dual.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rk806-dual.dtsi
index 431b037b137d..25eb2e282077 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rk806-dual.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rk806-dual.dtsi
@@ -149,6 +149,7 @@ rk806_dvs3_gpio: rk806_dvs3_gpio {

                regulators {
                        vdd_gpu_s0: DCDC_REG1 {
+                               regulator-always-on;
                                regulator-boot-on;
                                regulator-min-microvolt = <550000>;
                                regulator-max-microvolt = <950000>;
@@ -198,6 +199,7 @@ regulator-state-mem {
                        };

                        vdd_gpu_mem_s0: DCDC_REG5 {
+                               regulator-always-on;
                                regulator-boot-on;
                                regulator-min-microvolt = <675000>;
                                regulator-max-microvolt = <950000>;