poj 3762 The Bonus Salary! 需离散化

最新推荐文章于 2018-09-21 18:27:59 发布

原创最新推荐文章于 2018-09-21 18:27:59 发布 · 1.3k 阅读

0 ·

本内容遵循CC 4.0 BY-SA版权协议

收录于

图论

本文探讨了在有限时间内如何通过合理安排任务获得最高得分的问题。通过对任务的时间范围和得分进行建模，采用图论中的最大流最小割算法求解最优解。

点击打开链接

The Bonus Salary!

Time Limit: 2000MS		Memory Limit: 65536K
Total Submissions: 2299		Accepted: 601

Description

In order to encourage employees' productivity, ACM Company has made a new policy. At the beginning of a period, they give a list of tasks to each employee. In this list, each task is assigned a "productivity score". After the first K days, the employee who gets the highest score will be awarded bonus salary.

Due to the difficulty of tasks, for task i-th:

It must be done from hh_L_i : mm_L_i : ss_L_i to hh_R_i : mm_R_i : ss_R_i.
This range of time is estimated very strictly so that anyone must use all of this time to finish the task.

Moreover, at a moment, each employee can only do at most one task. And as soon as he finishes a task, he can start doing another one immediately.

XYY is very hard-working. Unfortunately, he's never got the award. Thus, he asks you for some optimal strategy. That means, with a given list of tasks, which tasks he should do in the first K days to maximize the total productivity score. Notice that one task can be done at most once.

Input

The first line contains 2 integers N and K (1 ≤ N ≤ 2000, 0 ≤ K ≤ 100), indicating the number of tasks and days respectively. This is followed by N lines; each line has the following format:

hh_L_i:mm_L_i:ss_L_i hh_R_i:mm_R_i:ss_R_i w

Which means, the i-th task must be done from hh_L_i : mm_L_i : ss_L_i to hh_R_i : mm_R_i : ss_R_i and its productivity score is w. (0 ≤hh_L_i, hh_R_i ≤ 23, 0 ≤mm_L_i, mm_R_i, ss_L_i, ss_R_i ≤ 59, 1 ≤ w ≤ 10000). We use exactly 2 digits (possibly with a leading zero) to represent hh, mm and ss. It is guaranteed that the moment hh_R_i : mm_R_i : ss_R_i is strictly later than hh_L_i : mm_L_i : ss_L_i.　

Output

The output only contains a nonnegative integer --- the maximum total productivity score.

Sample Input

5 2
09:00:00 09:30:00 2
09:40:00 10:00:00 3
09:29:00 09:59:00 10
09:30:00 23:59:59 4
07:00:00 09:31:00 3

Sample Output

Hint

The optimal strategy is:
Day1: Task1, Task 4
Day2: Task 3
The total productivity score is 2 + 4 + 10 = 16.

Source

有n个任务，每个任务都有一个区间，每完成一个任务就会得到一定的分数，每次只能做一个任务，而且要求做满此任务的整个时间段，给你k天的时间，问最多能够得到多少分。

首先时间太杂，因此需要离散化一下，将所有的时间点按照从小到大排序，然后每个时间点和它后面的时间点相连，容量为inf，费用为0.之所以这样连，是因为如果你要做这个时间点上的任务，那你就走时间段那条边，但如果你不做这个时间点上的任务，为了确保你还可以沿着时间继续走下去，所以建了一条容量为无穷费用为零的边。

将每个任务的开始和结束相连，容量为1，费用为负的分数，因为任务只能做一次，且要求最大分数，所以分数为负。

源点与第一个时间点相连，容量为k，费用为0.表示一共有k天。

//2404K	1266MS
#include<iostream>
#include<algorithm>
#include<cstring>
#include<queue>
#include<cstdio>
using namespace std;
const int MAXN=100000;
const int inf=10000000;
int pre[MAXN];          // pre[v] = k：在增广路上，到达点v的边的编号为k
int dis[MAXN];          // dis[u] = d：从起点s到点u的路径长为d
int vis[MAXN];         // inq[u]：点u是否在队列中
int path[MAXN];
int head[MAXN];
int NE,tot,ans,max_flow;
int z[90000];
int vist[MAXN];
struct T
{
    int s,e,w;
} time[2207];
struct node
{
    int u,v,cap,cost,next;
} Edge[MAXN];
void addEdge(int u,int v,int cap,int cost)
{
    Edge[NE].u=u;
    Edge[NE].v=v;
    Edge[NE].cap=cap;
    Edge[NE].cost=cost;
    Edge[NE].next=head[u];
    head[u]=NE++;
    Edge[NE].v=u;
    Edge[NE].u=v;
    Edge[NE].cap=0;
    Edge[NE].cost=-cost;
    Edge[NE].next=head[v];
    head[v]=NE++;
}
int SPFA(int s,int t)                   //  源点为0，汇点为sink。
{
    int i;
    for(i=s; i<=t; i++) dis[i]=inf;
    memset(vis,0,sizeof(vis));
    memset(pre,-1,sizeof(pre));
    dis[s] = 0;
    queue<int>q;
    q.push(s);
    vis[s] =1;
    while(!q.empty())        //  这里最好用队列，有广搜的意思，堆栈像深搜。
    {
        int u =q.front();
        q.pop();
        for(i=head[u]; i!=-1; i=Edge[i].next)
        {
            int v=Edge[i].v;
            if(Edge[i].cap >0&& dis[v]>dis[u]+Edge[i].cost)
            {
                dis[v] = dis[u] + Edge[i].cost;
                pre[v] = u;
                path[v]=i;
                if(!vis[v])
                {
                    vis[v] =1;
                    q.push(v);
                }
            }
        }
        vis[u] =0;
    }
    if(pre[t]==-1)
        return 0;
    return 1;
}
void end(int s,int t)
{
    int u, sum = inf;
    for(u=t; u!=s; u=pre[u])
    {
        sum = min(sum,Edge[path[u]].cap);
    }
    max_flow+=sum;                          //记录最大流
    for(u = t; u != s; u=pre[u])
    {
        Edge[path[u]].cap -= sum;
        Edge[path[u]^1].cap += sum;
        ans += sum*Edge[path[u]].cost;     //  cost记录的为单位流量费用，必须得乘以流量。
    }
}
int main()
{
    int n,k,s,t;
    scanf("%d%d",&n,&k);
    memset(head,-1,sizeof(head));
    memset(z,0,sizeof(z));
    NE=ans=max_flow=s=0;
    int num=0,h,m,ss;
    for(int i=0; i<n; i++)
    {
        scanf("%d:%d:%d",&h,&m,&ss);
        time[i].s=h*3600+m*60+ss;
        z[num++]=time[i].s;
        scanf("%d:%d:%d",&h,&m,&ss);
        time[i].e=h*3600+m*60+ss;
        z[num++]=time[i].e;
        scanf("%d",&time[i].w);
    }
    sort(z,z+num);
    int e=1;
    memset(vist,0,sizeof(vist));
    for(int i=0; i<num; i++)
        if(!vist[z[i]])vist[z[i]]=e++;
    for(int i=1; i<e-1; i++)
        addEdge(i,i+1,inf,0);
    for(int i=0; i<n; i++)
        addEdge(vist[time[i].s],vist[time[i].e],1,-time[i].w);
    addEdge(0,1,k,0);
    t=e-1;
    while(SPFA(s,t))
    {
        end(s,t);
    }
    printf("%d\n",-ans);
    return 0;
}